Insert the test leads into the "COM" and "VΩ" holes, turn the knob to the desired range in "Ω", and connect the test leads to the metal parts at both ends of the resistor.
הודעה:
1. If the measured resistance value exceeds the maximum value of the selected range, the over-range "1" will be displayed, and a higher range should be selected. For the resistance greater than 1MΩ or higher, it will take several seconds for the reading to stabilize. This is normal.
2. When not well connected, such as open circuit, the meter displays "1".
3. בעת בדיקת העכבה של הקו הנבדק, הקפד להסיר את כל ספקי הכוח בקו הנבדק ולפרוק את כל הקבלים. אם יש ספקי כוח ורכיבי אחסון אנרגיה בקו הנבדק, זה ישפיע על נכונות בדיקת עכבת הקו.
4. The 200MΩ gear of the multimeter has 10 characters in short circuit. When measuring a resistance, these 10 characters should be subtracted from the measurement reading. For example, when measuring a resistance, it is displayed as 101.0, and 10 characters should be subtracted from 101.0. The actual resistance value of the measured component is 100.0 or 100MΩ.
5. ניתן לגעת בהתנגדות עם הידיים במהלך המדידה, אך אל תיגע בשני קצוות ההתנגדות עם הידיים בו זמנית - גוף האדם הוא מוליך עם התנגדות גדולה אך מוגבלת.
GVDA Digital Clamp meter GD118B:
Pls Clink Below Photo and Read more details about this מד מהדק דיגיטלי GVDA GD118B :
