שימוש במיקרוסקופ מטלורגי בהגדלה נמוכה
1. יישור האור של מיקרוסקופ מתכות
ביד שמאל, סובב את בורג הכוונון הגס כדי לגרום לקנה העדשה להתרומם או לפלטפורמת המנשא למטה, ולאחר מכן סובב את ממיר האובייקטיב כדי שהעדשה בהגדלה נמוכה תהיה מיושרת עם פלטפורמת הנשא דרך חור האור (יש להיזהר בסיבוב צור את עדשת האובייקטיב מעל חוסר החריטה ואת הבסיס של אבזם האבזם הקבוע), פתח את הצמצם, סובב את בורג הרמת עדשת האספן, כך שמראת האספן בקצה העליון של מישור העדשה תהיה מעט נמוכה מגובה מישור פלטפורמת הנשא, שתי העיניים בו זמנית, תוך התאמת כיוון הרפלקטור עד לשדה הראייה של האור אחיד והבהירות מתונה.
2. מיקרוסקופ מטאלוגרפימיקום דגימת השקופית
קח דגימת שקף והנח אותה על במת המנשא כאשר צד הכיסוי פונה כלפי מעלה, קבע אותה על הדוחף, ולאחר מכן סובב את בורג הדוחף ביד כדי ליישר את הדגימה שיש לראות עם מרכז הפתח.
3. מיקרוסקופ מטאלוגרפיהתאמת הפוקוס
סובב את בורג הכוונון הגס ביד, צור את עדשת ההגדלה הנמוכה<6mm from the slide specimen (when adjusting the distance between the objective lens and the slide must be watched from the side, do not turn the coarse adjustment screw at the same time as observing with your eyes on the eyepiece to prevent the lens from colliding with the slide and causing damage), and then open your eyes at the same time, turn the coarse adjustment screw slowly by hand so that the lens rises or make the carrier table fall, when the object image in the field of view is viewed, then adjust the fine adjustment screw until a clear object image appears in the field of view. When the object image appears in the field of view, adjust the fine adjustment screw until a clear object image appears in the field of view. If the object image is not in the centre of the field of view, move the slide specimen up and down, left and right (Note: the direction of movement of the slide is opposite to the direction of movement of the observed object image). If the distance between the lens and the specimen slice has exceeded the working distance when adjusting the focal length and the object image is not seen, then it should be reopened strictly according to the above steps.
